Fit-outs and premises

Dental surgery fit-out cost: what a new or renovated surgery really costs, and how owners pay for it

A room-by-room view of what a dental surgery fit-out or renovation costs, why published figures disagree, when the money falls due, and how owners fund it.

Updated 13 November 2026 · Essential Finance editorial team

See if you qualify →No credit check to enquire
Dental delivery unit with instrument hoses in a surgery, with a dentist in green scrubs standing blurred behind

Quick answer

A dental surgery fit-out in Australia commonly costs from about $100,000 for a small two-to-three chair clinic to $500,000 or more for a six-chair practice, according to industry cost guides. Chair count, plumbing, suction and compressor services, a sterilisation room and any OPG or CBCT imaging room drive the number. Most owners fund it in stages: equipment finance for the clinical kit and a separate facility for the build.

Key points

  • Industry guides put a small clinic at $100k–$150k, a mid-range practice at $200k–$300k and a six-room-plus practice at $500k or more
  • Cost rises in steps: each added chair brings its own plumbing, suction, joinery, floor space and equipment
  • An OPG or CBCT room needs a shielding assessment and a radiation licence before the unit is used
  • Sterilisation now has to meet AS 5369:2023, which replaced the older reprocessing standards
  • Equipment items under $20,000 each may qualify for the permanent instant asset write-off
  • Match funding to stages: build progress claims, equipment deposits and a buffer for the quiet first months

Industry cost guides put a dental surgery fit-out in Australia at roughly $100,000 for a small two or three chair clinic, rising to $500,000 or more for six chairs and up. The spread is wide because chair count, plumbing, suction, sterilisation and imaging each move the total. Most owners fund the build, the equipment and the opening months as three separate pieces.

Those figures come from vendor and marketplace guides, not from quotes, so treat them as a starting frame. The useful question isn’t “what’s the average?” It’s “what will my rooms cost, and when does each payment fall due?” This guide walks through both.

Why do published dental fit-out figures disagree?

Search for the cost and you’ll find ranges that barely overlap. One national guide describes a basic refresh at $80,000 to $150,000 and a full clinic at $250,000 to $450,000 or more. A Melbourne contractor guide puts dental construction at about $2,200 to $3,500 per square metre, with a typical practice at $250,000 to $600,000 before clinical equipment.

They disagree because they describe different jobs:

  • A refresh versus a rebuild. New flooring and joinery in an existing surgery is a different project from relocating plumbing and drainage.
  • Whether equipment is inside the number. Some figures include chairs and imaging. Others stop at the walls.
  • Chair count. Costs rise in steps, not smoothly. Each added surgery brings its own services, joinery, floor space and equipment.
  • Location and building condition. A shell with no wet areas costs far more to convert than a former dental suite.

One vendor guide splits a project into design ($5,000 to $30,000), construction ($50,000 to $200,000 or more), equipment and technology ($50,000 to $300,000), compliance ($20,000 to $50,000) and furniture and finishing ($20,000 to $50,000). Those are vendor estimates, but the split is a handy checklist: if your quote is missing a line, ask where it went.

What goes into the cost of one surgery?

There’s no reliable published price “per surgery”, so build it up yourself. For each room, price these lines separately:

Line What to check
Building work Walls, flooring, ceiling, joinery, cabinetry, doors
Plumbing and drainage Floor waste or under-floor runs to each chair; amalgam separator and wastewater requirements
Services Suction, compressed air, electrical outlets and data, ventilation
Chair and delivery unit Listed at roughly $20,000 to $50,000 or more per unit
Lighting, monitors, stools Often priced as a package with the chair
Imaging Intraoral sensors, plus a share of any OPG or CBCT room
Sterilisation share Autoclave capacity, washer and storage scaled to chair count

Central plant items such as the compressor and suction pump usually serve several chairs. That’s why the second and third surgery are often cheaper to add than the first, provided the plant was sized for growth. If you’re planning a staged build, ask your designer to size the compressor, suction and electrical supply for the final chair count now, even if you only fit out three rooms on day one.

Which lines do owners forget?

Three items regularly turn up late and push the budget out.

Radiation shielding and licences

If you’re adding an OPG or CBCT, shielding isn’t optional and the paperwork comes before the machine. The Victorian Department of Health says it’s compulsory to hold a radiation management licence before taking possession of a dental radiation source. Applications need a radiation management plan, and extra-oral units like OPG and CBCT also need a shielding assessment report covering the room plan, neighbouring rooms, occupancy and workloads. Each operator needs their own use licence as well.

NSW works differently. Premises that own, store and operate x-ray units need a radiation management licence through the EPA, and dental practitioners need an IA24 licence to use CBCT. In the ACT, health authority guidance asks for a radiation shielding plan before construction begins. The common lesson: get the assessment done before the builder prices the walls, because it can change what’s in them.

Sterilisation to the current standard

AS 5369:2023, released in December 2023, now governs reprocessing of reusable medical devices. The Australian Commission on Safety and Quality in Health Care says it replaces AS/NZS 4187:2014 and AS/NZS 4815:2006. In NSW, the ADA reports that dental practitioners are now formally required to meet it under the state’s health regulation. If you’re building or renovating, design the sterilising room around the standard, including steriliser validation and a workflow that moves from dirty to clean, rather than retrofitting it after opening.

The months before the book fills

Rent, wages, software and consumables start before the first patient. A renovation of an existing practice may mean closing surgeries while the work happens, which means lost income as well as spend. Price the downtime as a real line in your budget.

When does the money actually fall due?

Our clinic fit-out timeline covers the general sequence. In a dental project the payments land like this:

Stage What you pay for
Lease and design Bond or bank guarantee, designer, shielding assessment
Approvals Council, certifier, radiation licence application
Construction Progress claims from the builder, often monthly
Equipment Order deposits, then the balance at installation
Opening Software, stock, consumables, marketing, staff onboarding
Ramp-up Wages and rent while the diary builds

Equipment deposits and builder claims often overlap, which is where cash flow gets tight even when the total budget is sound. Our fit-out and equipment calculator lets you lay those stages against each other.

If you’re working out what the whole project might need, you can check your options in about a minute while you refine the numbers. It doesn’t commit you to anything.

Illustrative example: adding three surgeries to a leased suite

Illustrative only. This describes no real practice, and the figures are planning numbers, not quotes.

A two-dentist practice leases a 150 m² suite and plans three surgeries, a sterilising room, a small OPG room and reception. The shell has power but only one wet area.

Their planning budget looks like this:

  • Building works and services: about $200,000, because the plumbing, suction and drainage runs to three chairs are the expensive part.
  • Chairs, delivery units and clinical equipment: about $130,000.
  • OPG, shielding and physicist’s assessment: about $60,000.
  • Design, approvals and fees: about $25,000.
  • Opening buffer: four months of wages and rent, held aside.

They split the funding. The chairs, delivery units and OPG go on equipment finance matched to their working life. The build is drawn as builder claims fall due. A smaller working capital line backs the buffer. A few items, such as curing lights and an intraoral scanner, each cost under $20,000, so their accountant checks them against the instant asset write-off.

How do dental owners fund a fit-out?

These are the usual structures, using the ranges on our dental practice finance page:

  • Equipment finance for chairs, imaging and sterilisation equipment. Terms follow the equipment’s working life. See dental equipment finance.
  • Unsecured or cash-flow facilities, typically $20,000 to $500,000, sized on turnover and bank statements. A fit for an established practice refitting a few rooms.
  • Property-secured business loans, from $20,000 to $5,000,000, using residential or commercial property. Often used for new practices and larger builds without trading history.
  • A line of credit for the early months, so payroll doesn’t hinge on how fast new chairs fill.

Our clinic fit-out finance page explains staged drawdowns. If you’re buying an existing practice instead of building one, see buying a dental practice.

One GST note: most dental services are GST-free, which can limit the GST credits you can claim on a fit-out. Ask your accountant how this applies to your mix of services before you budget on the assumption that GST comes back.

Getting the room right before the money goes out

Your days are spent looking after patients’ teeth, and the surgery should support that, not become a worry itself. The owners who get through a build calmly price every room and compliance line before signing, begin the radiation paperwork ahead of the builder, and line funding up with the payment stages rather than emptying savings on day one.

Putting that funding together is something we do for dental owners regularly. The enquiry takes about 60 seconds, and there’s no credit check at this stage, so your score stays as it is. We don’t pass your details around a pile of lenders, so your phone won’t light up with strangers. Instead, a real person who knows how practices run reads your situation and calls you.

Do fill in the form accurately, covering the project total, the equipment share, any property you could offer and when the builder expects payment. Precise answers let us match the right option the first time.

Let’s get your surgery plan funded →

Ready when you are

Check your options in about 60 seconds

A few quick questions. Asking won't touch your credit file, your details aren't sent to a pile of lenders, and a real person reads every enquiry.

Frequently asked questions

How much does it cost to fit out a dental surgery in Australia?

Industry cost guides, which are vendor estimates rather than quotes, put a small clinic of two to three treatment rooms at roughly $100,000 to $150,000, a mid-range four-to-five room practice at $200,000 to $300,000, and a practice of six or more rooms at $500,000 or more. A Melbourne cost guide puts dental construction at about $2,200 to $3,500 per square metre before clinical equipment.

How much does one extra dental surgery cost to add?

No reliable published per-surgery figure exists, because each added room brings its own services, joinery, floor space and equipment. A useful way to estimate it is to price the build for the room (plumbing, suction and compressor connections, electrical, joinery), then add the chair and delivery unit, which are listed at roughly $20,000 to $50,000 or more per unit, plus lighting, monitors and imaging.

Do I need a licence for an OPG or CBCT machine?

Generally yes, and before you take possession of the unit. Victoria's Department of Health says a radiation management licence is compulsory before taking possession of a dental radiation source, with a radiation management plan and, for extra-oral units like OPG and CBCT, a shielding assessment report. NSW requires a radiation management licence for premises, and dentists need an IA24 licence to use CBCT. Check your own state regulator.

What standard applies to the sterilisation room?

AS 5369:2023, released in December 2023, now governs reprocessing of reusable medical devices and supersedes AS/NZS 4187:2014 and AS/NZS 4815:2006, according to the Australian Commission on Safety and Quality in Health Care. Plan the sterilising area, steriliser validation and workflow around it before the builder sets out the room.

Can I claim the instant asset write-off on dental equipment?

Possibly. The $20,000 instant asset write-off applies per asset for small businesses under the $10 million aggregated turnover threshold, so smaller items such as an intraoral scanner, curing lights or an autoclave may qualify if each costs under $20,000. Chairs, CBCT and building works usually cost more or are treated differently. Your accountant can confirm what applies.

Can I finance a dental fit-out without property security?

For an established practice, unsecured and cash-flow options typically run from $20,000 to $500,000, sized on turnover and bank statements. Property-secured business loans run from $20,000 to $5,000,000 and are common for new practices or larger builds with no trading history to lend against. Many owners split the project into equipment finance and a separate facility for the build.

See what your business could qualify for

One short enquiry, no credit check when you first enquire, and a real person who calls you back with options that fit.

No credit check to enquire

No spray-and-pray

A real person on your file